Pneumatic Compressor / Booster

The purpose of TOP INDUSTRIE compressors / boosters is to increase the pressure of a gas.

They work for gases entering the booster with a minimal pressure of at least 25 bar, and can increase the pressure at exit point to up to 3500 bar.

Both one stage and two stage boosters exist. A special version which is suitable for use with hydrogen is also available.

Electric versions of these devices exist with a slightly higer flow capacity.

Features of the Pneumatic Booster :

Air consumption 70 Nm3 / h. max
Maximum speed 100 strokes /min
1000 bar cylindrical head: 4,54 cm3
3500 bar cylindrical head: 1,53 cm3
Delivered with a filter regulator lubrificator (FRL) for compressed air
Weight 1 head: 34 kg. ; 2 heads : 51 kg
1 / 8" or 1 / 4" HP Tubing
Air entry connexion : 1 / 2" Gas

 

D3A- Pneumatic compressor
D3A RV Pneumatic compressor.pdf
Document Adobe Acrobat [909.8 KB]

Electric Compressor / Booster

The purpose of TOP INDUSTRIE boosters / compressors is to increase the pressure of a gas. They work for gases entering the booster with a minimal pressure of at least 25 bar, and can increase the pressure at exit point to up to 3500 bar.

Both one stage and two stage boosters exist. A special version which is suitable for use with hydrogen is also available.

Pneumatic versions of these devices exist for use in an ATEX environment.

Caracteritics of the electric compressor / booster:

  • Rotation speed: 323 tr / mn.
  • 1000 bar cylindrical head: 3,24cm3.
  • 3500 bar cylindrical head: 1 cm3.
  • HP Tubing: 1/8" or 1/4".
  • Gas is not contaminated thanks to double membrane.
  • All parts of the booster which come into contact with the gas are made from stainless steel.
  • Can be used with inert gases (hydrogen is optional).
  • Each membrane head is protected from excess pressure by a safety valve.
  • Very quiet booster
  • Gear pump allows compressor to be used in most positions.
  • Driven by a notched belt pulley
D2A- Electric booster
D2A RV Electric booster.pdf
Document Adobe Acrobat [1'016.7 KB]

Pressure multiplier / intensifier

TOP INDUSTRIE pressure multipliers work for both gases and liquids and can attain pressures of up to 12 000 bar.

We offer a wide range of types, but can also design and produce specific models corresponding to your needs in respect of pressure and/or volume requirements.

 

Caracteristics of the pressure multiplier:


• HP fluid: liquid or gas.

• Primary fluid: liquid or gas.

• Bridgman Seal for high pressures.

• Material: 35 NCD 16 or stainless steel.

Other possible materials : Hastelloy, Inconel, etc.

• Single effect, minimal return pressure from 200 to 500 bar.

• Static or dynamic operating modes

 

Options of the pressure multilplier:


• Central rod in order to gauge the position of the piston

• Limit switches

• Double effect

D7A- Pressure intensifier
D7A Pressure intensifier.pdf
Document Adobe Acrobat [515.0 KB]