The purpose of TOP INDUSTRIE compressors / boosters is to increase the pressure of a gas.

They work for gases entering the booster with a minimal pressure of at least 25 bar, and can increase the pressure at exit point to up to 3500 bar.

Both one stage and two stage boosters exist. A special version which is suitable for use with hydrogen is also available.

Electric versions of these devices exist with a slightly higer flow capacity.

Features of the Pneumatic Booster :

• Air consumption 70 Nm3 / h. max
• Maximum speed 100 strokes /min
• 1000 bar cylindrical head: 4,54 cm3
• 3500 bar cylindrical head: 1,53 cm3
• Delivered with a filter regulator lubrificator (FRL) for compressed air
• Weight 1 head: 34 kg. ; 2 heads : 51 kg
• 1 / 8" or 1 / 4" HP Tubing
• Air entry connexion : 1 / 2" Gas

The purpose of TOP INDUSTRIE boosters / compressors is to increase the pressure of a gas. They work for gases entering the booster with a minimal pressure of at least 25 bar, and can increase the pressure at exit point to up to 3500 bar.

Both one stage and two stage boosters exist. A special version which is suitable for use with hydrogen is also available.

Pneumatic versions of these devices exist for use in an ATEX environment.

Caracteritics of the electric compressor / booster:

• Rotation speed: 323 tr / mn.
• 1000 bar cylindrical head: 3,24cm3.
• 3500 bar cylindrical head: 1 cm3.
• HP Tubing: 1/8" or 1/4".
• Gas is not contaminated thanks to double membrane.
• All parts of the booster which come into contact with the gas are made from stainless steel.
• Can be used with inert gases (hydrogen is optional).
• Each membrane head is protected from excess pressure by a safety valve.
• Very quiet booster
• Gear pump allows compressor to be used in most positions.
• Driven by a notched belt pulley

TOP INDUSTRIE pressure multipliers work for both gases and liquids and can attain pressures of up to 12 000 bar.

We offer a wide range of types, but can also design and produce specific models corresponding to your needs in respect of pressure and/or volume requirements.

Caracteristics of the pressure multiplier:

• HP fluid: liquid or gas.

• Primary fluid: liquid or gas.

• Bridgman Seal for high pressures.

• Material: 35 NCD 16 or stainless steel.

Other possible materials : Hastelloy, Inconel, etc.

• Single effect, minimal return pressure from 200 to 500 bar.

• Static or dynamic operating modes

Options of the pressure multilplier:

• Central rod in order to gauge the position of the piston

• Limit switches

• Double effect